SLASH Antipanic Bars - Panic exit devices

Finishing

Accessories

SLASH

CHARACTERISTICS

  • Panic exit device that stands out for its particular design and the rounded form of the casings. In addition to improving its aesthetic appeal, this helps reduce the risk of mishaps during use;
  • Available in different color and surface combinations, in polished stainless steel cover casings and bar, or in polished chromium-plated aluminium casing with an anodized aluminium bar, or in the ever-fashionable classic combination of black nylon casings with an anodized aluminium bar;
  • Certifi ed for insertable latch mechanisms with 65 mm openings for single leaves and active leaves and 80 mm openings for passive leaves;
  • Reversible for right- or left-handed opening;
  • Protrusion 75 mm;
  • Proposed as a complete KIT in a single black/orange box;
  • Package label indicates the product characteristics;
  • Wide range of options: colored bar, colored or stainless steel handles, latch mechanisms with access control functions, special coded or mastered cylinders.


EXUS® is a registered trademark owned by Ninz S.p.A.

Also suitable for doors with classifications up to:

CERTIFICATION

Suitable for single-leaf doors and for the active or passive leaf of double-leaf doors up to 1350 x 2880 mm/leaf in size with a maximum weight of 300 kg/leaf.

Denomination SLASH PANIC EXIT DEVICE
Manufacturer Ninz S.p.A. Corso Trento, 2/A I-38061 ALA (TN)/ITALIA
Year application trademark 08
N° and year of the regulation EN 1125:2008
Certification authority 0425
N° of CE certificate 1308-CPD-2007
Classification

3   7   7   B   1   3   2   2   B   A

1° 2° 3° 4°   5° 6° 7° 8° 9° 10°

1° Category of use: high frequency 2° Durability: 200,000 cycles 3° Mass of door: over 200 kg 4° Suitable for fire/smoke doors 5° Safety: suitable for evacuation routes 6° Highly corrosion resistance 96 h 7° Safety of materials 1000 N 8° Protrusion of the bar: up to 100 mm 9° Activation type: touch bar 10° Suitable for single- and double-leaf doors


KIT SLASH IN BLACK NYLON

Description The nylon SLASH panic exit device consists of a horizontal bar made of anodized aluminium and an internal connector tube that engages the control mechanisms in order to activate the latch mechanism.

  • Reversible for right- or left-handed opening;
  • Applicable to single-leaf or double-leaf doors;
  • Suitable for PROGET/UNIVER/REVER and other types of panic doors;
  • The horizontal bar is made of extruded anodized aluminium with an elliptical 40 x 20 mm cross section and a length of 1150 mm;
  • The two control mechanisms are made of galvanized steel with black nylon cover casings, one of which has an EXIT label to indicate the latch mechanism side;
  • The panic/fire latch mechanism is for European profile cylinders;
  • The external controls and mounting plates are made of black nylon, the under-plate is in galvanized steel.

Optional variations

  • Aluminium bar painted in RAL colors
  • External BM and BSP controls in polished stainless steel
  • External BM and BSP controls painted in RAL colors
  • MAC® 1 type panic latch mechanism with access control function
  • Coded or mastered cylinders
  • Microswitches and cable gland, for signaling when the door is open

AVAILABLE VERSIONS

KIT for single-leaf doors or the active leaf of double-leaf doors KIT contents : 1 panic latch mechanism for 65 mm holes, 1 insert for the latch mechanism keeper, 2 control mechanisms, 2 black nylon cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 nylon hole-covering plate in RAL color 9006 with under-plate, 1 black nylon external control, 1 half-cylinder with 3 keys, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Leaf thickness
4204301.036 SL BM* 60 mm
4204301.037 SL BSP 60 mm
4204301.038 SL BS 60 mm
4204301.039 SL BMC 60 mm
4204301.040 SL BC 60 mm

* versions that can be combined with the MAC® 1 latch mechanism

KIT for the passive leaf of double-leaf doors. Suitable for PROGET/UNIVER/REVER fire and multi-purpose doors. KIT contents : 1 panic safety lock for 80 mm holes, 2 control mechanisms, 2 black nylon cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 upper relatch device, 1 floor-mounted bushing, 1 link arm guide (except for REVER and UNIVER MULTI-PURPOSE), 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204302.013 SL A PROGET** fire and multi-purpose
4204302.014 SL A UNIVER fire
4204302.015 SL A REVER and UNIVER multi-purpose
4204302.016 SL AR PROGET** fire and multi-purpose
4204302.017 SL AR UNIVER fire
4204302.018 SL AR REVER and UNIVER multi-purpose

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm **manufactured after 01.01.2005

KIT for the passive leaf of double-leaf doors. Suitable for other types of multi-purpose doors KIT contents : 1 panic safety lock for 80 mm hole, 2 control mechanisms, 2 black nylon cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 upper relatch device, 1 upper keeper, 1 angle-iron support, 1 adjustable upper rod, 1 lower rod, 1 floormounted bushing, 1 link arm guide, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204305.005 SL A Other types of multi-purpose doors
4204305.006 SL AR Other types of multi-purpose doors

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm

KIT SLASH IN ALUMINIUM

Description The SLASH ALU panic exit device consists of a horizontal bar made of anodized aluminium and an internal connector tube that engages the control mechanisms in order to activate the latch mechanism.

  • Reversible for right- or left-handed opening;
  • Applicable to single-leaf or double-leaf doors;
  • Suitable for PROGET/UNIVER/REVER and other types of panic doors;
  • The horizontal bar is made of extruded anodized aluminium with an elliptical 40 x 20 mm cross section and a length of 1150 mm;
  • The two control mechanisms are made of galvanized steel with black nylon cover casings, one of which has an EXIT label to indicate the latch mechanism side;
  • The panic/fire latch mechanism is for European profile cylinders;
  • The external controls consist of a handle or knob made of AISI 304 stainless steel and a mounting plate in aluminium alloy with a polished chromium-plated finish;
  • The casings and handle plate are finished with trivalent chrome in compliance with the ROSH regulation.

Optional variations

  • Aluminium bar painted in RAL colors
  • MAC® 1 type panic latch mechanism with access control function
  • Coded or mastered cylinders
  • Microswitches and cable gland for signaling when the door is open

AVAILABLE VERSIONS

KIT for single-leaf doors or the active leaf of double-leaf doors KIT contents : 1 panic latch mechanism for 65 mm holes, 1 insert for the latch mechanism keeper, 2 control mechanisms, 2 polished chromium-plated aluminium cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 black nylon hole-covering plate with under-plate, 1 stainless steel/aluminium external control, 1 half-cylinder with 3 keys, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Leaf thickness
4204301.041 SL ALU BM* 60 mm
4204301.042 SL ALU BSP 60 mm

* versions that can be combined with the MAC® 1 latch mechanism

KIT for the passive leaf of double-leaf doors. Suitable for PROGET/UNIVER/REVER fire and multi-purpose doors. KIT contents : 1 panic safety lock for 80 mm hole, 2 control mechanisms, 2 polished chromium-plated aluminium cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 upper relatch device, 1 floor-mounted bushing, 1 link arm guide (except for REVER and UNIVER MULTI-PURPOSE), 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204302.019 SL ALU A PROGET** fire and multi-purpose
4204302.020 SL ALU A UNIVER fire
4204302.021 SL ALU A REVER and UNIVER multi-purpose
4204302.022 SL ALU AR PROGET** fire and multi-purpose
4204302.023 SL ALU AR UNIVER fire
4204302.024 SL ALU AR REVER and UNIVER multi-purpose

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm **manufactured after 01.01.2005

KIT for the passive leaf of double-leaf doors. Suitable for other types of multi-purpose doors KIT contents : 1 panic safety lock for 80 mm hole, 2 control mechanisms, 2 chromium-plated aluminium cover casings, 1 anodized aluminium bar with connector tube and spacer, 1 upper relatch device, 1 upper keeper, 1 angle-iron support, 1 adjustable upper rod, 1 lower rod, 1 floor-mounted bushing, 1 link arm guide, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204305.007 SL ALU A Other types of multi-purpose doors
4204305.008 SL ALU AR Other types of multi-purpose doors

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm

KIT SLASH IN STAINLESS STEEL

Description The stainless steel SLASH panic exit device consists of a horizontal bar made of stainless steel and an internal connector tube that engages the control mechanisms in order to activate the latch mechanism.

  • Optimal resistance to corrosion and shocks;
  • Avant garde aesthetic appeal;
  • Secure attachment of casing;
  • Reversible for right- or left-handed opening;
  • Applicable to single-leaf and double-leaf doors;
  • Suitable for PROGET/UNIVER/REVER and other types of panic doors;
  • The horizontal bar is made of AISI 304 polished stainless steel with an elliptical 40 x 20 mm cross section and 1150 mm length and equipped with a connector tube;
  • The two control mechanisms are made of galvanized steel with AISI 304 polished stainless steel cover casings, one of which has green label to indicate the latch mechanism side;
  • The panic/fire latch mechanism is for European profile cylinders;
  • The external controls and related mounting plate are made of AISI 304 polished stainless steel, and the underplate is made of galvanized steel.

Optional variations

  • MAC® 1 type panic latch mechanism with access control function
  • Coded or mastered cylinders
  • Microswitches and cable gland for signaling when the door is open

AVAILABLE VERSIONS

KIT for single-leaf doors or the active leaf of double-leaf doors KIT contents : 1 reversible panic latch mechanism for 65 mm holes, 1 insert for the latch mechanism keeper, 2 stainless steel control mechanisms, 2 stainless steel cover casings, 1 stainless steel bar with connector tube and spacer, 1 black nylon hole-covering plate with underplate, 1 stainless steel external control, 1 half-cylinder with 3 keys, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Leaf thickness
4204301.043 SL inox BM* 60 mm
4204301.044 SL inox BSP 60 mm

* versions that can be combined with the MAC® 1 latch mechanism

KIT for the passive leaf of double-leaf doors. Suitable for PROGET/UNIVER/REVER fire and multi-purpose doors. KIT contents : 1 panic safety lock for 80 mm holes, 2 control mechanisms, 2 stainless steel cover casings, 1 stainless steel bar with connector tube and spacer, 1 upper relatch device, 1 floor-mounted bushing, 1 link arm guide (except for REVER and UNIVER MULTI-PURPOSE), 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204302.025 SL inox A PROGET** fire and multi-purpose
4204302.026 SL inox A UNIVER fire
4204302.027 SL inox A REVER and UNIVER multi-purpose
4204302.028 SL inox AR PROGET** fire and multi-purpose
4204302.029 SL inox AR UNIVER fire
4204302.030 SL inox AR REVER and UNIVER multi-purpose

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm **manufactured after 01.01.2005

KIT for the passive leaf of double-leaf doors. Suitable for other types of multi-purpose doors KIT contents : 1 panic safety lock for 80 mm holes, 2 control mechanisms, 2 stainless steel cover casings, 1 stainless steel bar with connector tube and spacer, 1 upper relatch device, 1 upper keeper, 1 angle-iron support, 1 adjustable upper rod, 1 lower rod, 1 floor-mounted bushing, 1 link arm guide, 1 drilling guide, 1 adhesive pictogram (green arrow), 1 installation/maintenance manual.

Article no. KIT bar Door
4204305.009 SL inox A Other types of multi-purpose doors
4204305.010 SL inox AR Other types of multi-purpose doors

AR (reduced) for use on passive leaves with a width of FM L2 <= 500mm

CERTIFIED SYSTEM COMPONENTS

All NINZ panic exit devices come in complete kits to ensure CE product certification in conformity with regulation EN 1125:2008.


The following examples serve to help understand what a panic exit device is composed of in order to conform to the certified sample.

STAINLESS STEEL EXTERNAL CONTROLS

All of the black nylon KITs (except those for glazed doors) can be provided with polished stainless steel external BM and BSP controls.


BM polished stainless steel                 BSP polished stainless steel

COLORED PLASTIC EXTERNAL CONTROLS

All of the black nylon KITs (except those for glazed doors) can be provided with painted PP polypropylene external BM and BSP controls.


BMC colored RAL1023                             BSPC colored RAL1023

PAINTED HORIZONTAL BAR

All KITs (except those with stainless steel bars) can be provided with an aluminIum horizontal bar painted in the requested RAL color.


VERSION “E” WITH MICROSWITCH

All KITs can be provided with a microswitch incorporated in the hinge-side of the mechanism for indicating when the door is open. The cable and cable gland for the electrical connection between the panic bar and the wall are included.


“MAC® 1” ACCESS CONTROL SYSTEM

All KITs with type BM external commands (except those for glazed doors) can include a panic latch mechanism that also functions for access control. This option includes a MAC® 1 latch mechanism and an external control with an LED signal on the plate. The MAC® 1 latch mechanism is not reversible, it is necessary to indicate the opening direction of the door.

TECHNICAL SPECIFICATIONS

  • Power supply 12-24 Vdc, 12-24 Vac
  • Absorption 250 mA with peak at 500 mA
  • Timer incorporated, fixed time of 30 seconds
  • Possibility of continuous power source (stopped during daytime)

Black nylon handle with LED                 Stainless steel handle with LED

Article no. Description
3201001.016 Latch mechanism for single-leaf door or active leaf (AP 16/18)
3201001.024 Safety lock for passive leaf (AP 020 P)
3201001.008 Safety lock for passive leaf UNIVER MULTI-PURPOSE and REVER (AP 020 U)
3201001.041 MAC® 1 SX (left-opening) latch mechanism
3201001.042 MAC® 1 DX (right-opening) latch mechanism
2401001.001 Lower bushing for passive leaf PROGET and MULTI-PURPOSE
3105019.001 Lower bushing for passive leaf UNIVER
3105020.001 Lower bushing for passive leaf REVER
2401006.001 Latch mechanism keeper insert for single-leaf door PROGET and MULTI-PURPOSE
3105080.001 Upper device for passive leaf PROGET and MULTI-PURPOSE
3105024.001 Upper device for passive leaf UNIVER and REVER
2401046.001 Upper keeper for passive leaf PROGET and MULTI-PURPOSE
3305001.001 Link arm guide for passive leaf

Article no. Description
4506002.17 Latch mechanism for single-leaf or active leaf
4506002.18 Safety lock for passive leaf
4506006 Latch mechanism keeper plate for single-leaf door
3105000 Upper device and keeper for passive leaf
3105099 Lower bushing for passive leaf

IMPORTANT INFORMATION

The safety features of panic exit devices are fundamental to their conformity with EN 1125:2008 because this regulation allows no modifications of any type, with the exception of those described in the manufacturer’s installation instructions.

All NINZ® installation instructions for panic exit devices include a list of elements that have been tested and approved for use with the panic exit device and that can be packaged separately.

No modifications in the certified system are allowed and every component must remain unchanged.

Use of components other than those certified and contained in the package is not allowed.

All of the components supplied and described must be installed and assembled by qualified technicians in accordance with the installation instructions.


Panic exit devices manufactured in conformity with European regulations provide high levels of personal safety and adequate safety levels for material property as long as they are assembled on doors and doorframes that are in good condition.

Installation should be carried out by qualified personnel only, and in strict conformity with manufacturer instructions.

Once installation is complete, a dynamometer should be used to measure the force required for the horizontal bar to release the latch mechanism, and the forces that are measured should be entered in the maintenance record.

The instructions should be kept on file by the owner of the activity.